General Purpose Forceps and Tweezers
Available in a variety of sizes, styles, and configurations to support specific handling requirements, including pointed, blunt, rounded, curved, angled, or flat tips; plain or serrated gripping surfaces; scissor-style handles; self-closing designs; alignment guide pins; and protective foam, silicone, or PTFE-coated surfaces to enhance grip and minimize contamination or damage to sensitive components and materials.
Typical applications include manipulation of microscope coverslips, filter papers and discs, electronic components, precision mechanical parts, and other small or fragile items in controlled, industrial, research, and manufacturing environments. Excludes surgical, dissection, and other medical forceps intended for clinical procedures.
Electron Microscopy Sciences EMS Fiber Tip Tweezers Style 5X, Type CF-PA66/CF30, 130 mm
The handles are made from Antimagnetic Steel and tips are synthetic fiber. Temperature Resistance: 375 degree F (190 degree C). Polyamide 66 with 30 wt% carbon fiber tips are heat stable -40 to 190C. Excellent tensile and flexural strength. Resistance to oils, non-polar solvents but not acids, alkalis, hot water. ESD safe. Good conductivity.
Material: CF-PA66/CF30
OAL: 130 mm
Tip width: 0.8 mm
Tip thickness: 0.6 mm
:
Electron Microscopy Sciences EMS Tweezers Style 5, PTFE Coating, Extra fine with superior finish Tips
The tweezers are the Swiss highest quality. PTFE is a superior anti-scratch, non-stick material.
Material: PTFE Coating
Tips: Extra fine with superior finish
OAL: 110 mm
Electron Microscopy Sciences EMS ESD Tweezers Style 3 SA/Dr, SA Steel, 120 mm OAL
Soft ESD safe cushion grips (resistively 10E8 ohm), these tweezers are ergonomically designed. Antimagnetic/anti-acid SA low carbon austenitic steel tweezers are corrosion resistant. Anti-glare satin finish.
OAL: 120 mm
Tips: SA Steel
Material: Very sharp and superior finish
Electron Microscopy Sciences EMS Wafer Tweezers Style 44WF
These tweezers are especially designed for the handling of delicate and fragile silicon wafers, scintillation discs, glass slides, coverslips etc. Made from antimagnetic/anti acid steel with a very smooth surface and a non-glare finish.
Tip Width: 12.0 mm
Depth: 8.5 mm
Tip Lip: E:2.5 mm
Offset: 3.5 mm
Electron Microscopy Sciences EMS Flat-Tip Tweezers Style 574A, 145 mm OAL
Flat-Tip Tweezers are made from SA low carbon austenitic steel that is non magnetic and anti acid which is ideal for use where corrosion resistance and toughness are primary requirements. The tweezers have serrated grips. Flat and tips bent upward. Tip width: 6mm.
OAL: 145 mm
World Precision Instrument Epoxy Coated Stainless Steel Tweezers
- The soft feel and non-slip grip makes this kit ideal for many applications. The tweezers are non-magnetic and non-reflective with an epoxy coating.
Electron Microscopy Sciences Rubis Standard SA Steel Tweezers Style 5L, 110 mm OAL
With more than fifty years of experience, RUBIS tweezers represents authentic Swiss quality. The material used in these tweezers is SA steel, which is acid-proof, stainless steel, 100% antimagnetic and it is resistant to HF and nitric acid. Super-fine points, with finger actiuated locking device.
OAL: 110 mm
Electron Microscopy Sciences Rubis Standard SA Steel Tweezers Style H, 90 mm OAL
With more than fifty years of experience, RUBIS tweezers represents authentic Swiss quality. The material used in these tweezers is SA steel, which is acid-proof, stainless steel, 100% antimagnetic and it is resistant to HF and nitric acid. Short and wide with fine tips.
OAL: 90 mm
Electron Microscopy Sciences Wafer Tweezers Glass-filled Delrin, 113 mm
Plastic wafer tweezers are low cost and designed for ease of use.
Electron Microscopy Sciences EMS Surface Mount Tweezers Style SM 110, 120 mm
These tweezers are made from SA low carbon austenitic steel that is non magnetic and anti acid which is ideal for use where corrosion resistance and toughness are primary requirements. They offer comfort and smooth handling and have a satin antiglare finish with an ergonomic design. Straight ‘T' shaped tips with a vertical grooved inside for holding cylindrical objects up to 1mm diameter.
Electron Microscopy Sciences Rubis Standard SA Steel Tweezers Style 00B, 110 mm OAL
With more than fifty years of experience, RUBIS tweezers represents authentic Swiss quality. The material used in these tweezers is SA steel, which is acid-proof, stainless steel, 100% antimagnetic and it is resistant to HF and nitric acid. Tips: thick and flat, medium sharp and strong for heavy duty work, serrated handle.
OAL: 110 mm
Electron Microscopy Sciences Rubis Standard SA Steel Tweezers Style OC9, 90 mm OAL
With more than fifty years of experience, RUBIS tweezers represents authentic Swiss quality. The material used in these tweezers is SA steel, which is acid-proof, stainless steel, 100% antimagnetic and it is resistant to HF and nitric acid. Flat fine points.
OAL: 90 mm
Electron Microscopy Sciences Negative action type 5 tweezers with super thin tips. OAL: 108 mm
Negative action type 5 tweezers with super thin tips. OAL: 108 mm
Electron Microscopy Sciences Semken Forceps with 1.7 mm Tip 6" Long
These forceps are available in Serrated/Straight tips.